Need help?Do you have a question about the Fischer Panda 7K PMS and is the answer not in the manual?
General| Brand | Fischer Panda |
|---|---|
| Model | 7K PMS |
| Category | Portable Generator |
| Language | English |
Crucial safety warnings and precautions to prevent injury.
Identifies necessary tools for installation and maintenance.
Official declaration of product compliance with EU directives.
Information on obtaining technical support via the internet.
Key information and requirements for initial generator start-up.
Detailed safety precautions for safe operation and handling.
Explains important warning and instruction signs on the generator.
Step-by-step instructions for performing CPR on an adult.
Defines the generator's purpose and scope of use.
Instructions for using the transport box for the generator.
Guidelines for safely transporting and handling the generator.
Lists the components included with the Fischer Panda PMS generator system.
Procedures for maintaining the generator during periods of inactivity.
Details and explanation of the generator's type plate information.
Detailed view of the right side of the Panda 4K PMS generator.
Detailed view of the left side of the Panda 4K PMS generator.
Detailed view of the front of the Panda 4K PMS generator.
Detailed view of the back of the Panda 4K PMS generator.
Detailed view from above the Panda 4K PMS generator.
Detailed view of the right side of the Panda 5K PMS generator.
Detailed view of the left side of the Panda 5K PMS generator.
Detailed view of the front of the Panda 5K PMS generator.
Detailed view of the back of the Panda 5K PMS generator.
Detailed view from above the Panda 5K PMS generator.
Detailed view of the right side of the Panda 7K PMS generator.
Detailed view of the left side of the Panda 7K PMS generator.
Detailed view of the front of the Panda 7K PMS generator.
Detailed view of the back of the Panda 7K PMS generator.
Explains the various functional components of the generator.
Specifies qualifications and conditions for operating personnel.
Provides essential guidelines for operating the generator.
Safety warnings and information regarding generator capacitors.
Procedures for checking the generator before starting operation.
Specifies qualifications for personnel performing installation.
Guidelines for preparing the installation base and positioning the generator.
Instructions for making electrical, fuel, and water line connections.
Steps for installing the raw water cooling system components.
Procedures for installing the fresh water cooling system.
Guidelines for installing the water-cooled exhaust system.
Instructions and considerations for installing the exhaust waterlock.
Guidance on installing the exhaust and water separator components.
Steps for installing the fuel supply and filtering system.
Instructions for connecting the generator's DC system and batteries.
Procedures for installing the generator's AC electrical system.
Specifies qualifications and conditions for maintenance personnel.
Guidelines for environmentally responsible disposal of materials.
Information on recommended service intervals for the generator.
General procedures and checks for routine maintenance.
Specifies when to perform engine oil changes.
Procedure for checking and refilling engine oil.
Steps for replacing the engine oil and oil filter.
Instructions for checking the starter battery and electrolyte.
Procedure for venting the generator's fuel system.
Steps for replacing the fuel filter and optional sight glass filter.
Instructions for replacing the optional fuel filter with a sight glass.
How to check and drain the water separator in the fuel supply.
Procedures for replacing the air filter mat.
Alternative method for replacing the air filter mat.
Another method for replacing the air filter using snap fasteners.
Steps for ventilating the generator's coolant circuit.
Instructions for replacing the V-belt for the cooling water pump.
Maintenance of the raw water circuit, including cleaning the filter.
Procedure for cleaning the raw water filter.
Explains reasons for frequent impeller wear in the cooling water pump.
Procedure for replacing the cooling water pump impeller.
Safety procedures for checking and discharging generator capacitors.
Steps for replacing the generator's electric starter motor.
Procedure for replacing the oil pressure switch.
Procedure for replacing the optional oil pressure sensor.
Steps for replacing the generator's operating current relays.
Instructions for replacing fuses in the generator.
Procedure for replacing the generator's thermoswitch.
Steps for replacing the generator's injection nozzles.
Procedure for replacing the generator's glow plugs.
Specifies qualifications for personnel performing troubleshooting.
Critical safety warnings and precautions for troubleshooting.
Lists essential tools and instruments for diagnosing faults.
Comprehensive guide for diagnosing and resolving generator issues.
Troubleshooting steps for low generator output voltage.
Troubleshooting steps for high generator voltage.
Troubleshooting steps for fluctuating generator voltage.
Troubleshooting steps when the generator cannot start an electric motor.
Troubleshooting steps when the diesel motor fails to start.
Troubleshooting steps when the starter motor turns but the engine doesn't start.
Troubleshooting steps for insufficient motor speed during startup.
Troubleshooting steps for an unsteady running motor.
Troubleshooting steps for motor speed drops.
Troubleshooting steps for motor running in an off position.
Troubleshooting steps for when the motor stops unexpectedly.
Troubleshooting steps for a sooty or black exhaust.
Conditions requiring immediate shutdown of the generator.
Visual guides for diagnosing and resolving generator faults.
Explanations for the steps outlined in the troubleshooting flowchart.
Explains the effects and prevention of generator overloading.
Guidelines for monitoring generator voltage for stable operation.
System for automatically monitoring and shutting down the generator based on voltage.
Troubleshooting steps for low generator output voltage.
Procedure for testing and inspecting generator capacitors.
How to measure generator winding resistance to detect faults.
Procedure to check generator windings for short circuits.
Troubleshooting steps when the generator produces no voltage.
Procedure to restore rotor magnetism for voltage generation.
Diagnosing and resolving issues related to starting the generator engine.
Troubleshooting the electric fuel solenoid valve.
Using the failure bypass switch for immediate generator restart.
Information on the optional lifting solenoid for motor stop.
Reference to the troubleshooting table and flowchart.
Provides technical specifications for the generator engine.
Details on the recommended type and quality of diesel fuel.
Information on SAE classes and API quality for engine oils.
Details on recommended antifreeze and coolant properties.
Table listing conduit diameters for various generator models.
Introduction to the P4 remote control panel and its functions.
Identifies and explains the controls and indicators on the front panel.
Details the connectors, jumpers, and fuse on the back of the control panel.
Important preliminary advice concerning starter battery usage.
Explains the generator's override mode for managing heat accumulation.
Essential daily checks required before starting the generator.
Step-by-step instructions for starting the generator.
Step-by-step instructions for safely stopping the generator.
Instructions for installing the remote control panel.
Guide for connecting the remote control panel cable.
Explains jumper settings for input configuration on the control panel.
Specific details on Jumper J101-J103 configuration.
Configuration of jumper settings for the 'Override' time.
Specifies maximum operating ratings for voltage and temperature.
To Next Page