Fischer Panda 7K PMS - Remote Control Panel P4 Control; Remote control panel

Remote Control Panel P4 Control
22.10.19 Kapitel/Chapter 9: Remote Control Panel P4 Control - Seite/Page 157
9. Remote Control Panel P4 Control
9.1 Remote control panel
Remote control panelP4 Control
The remote control panel is necessary to control the generator and to evaluate the motor/generator properties. The
generators will automatically cutout, if it does not run as required. The generator may not be run without the remote
control panel.
Fig. 9.1-1: Remote control panel
Art Nr.
0000522
Bez.
Remote Control Panel P4 Control
Tabelle 1:
Dokument Hardware Software
Aktuell: R03 V1.00 --------------------------
Ersetzt: R02.1 V1.00 --------------------------