Maintenance Instructions
22.10.19 Kapitel/Chapter 6: Maintenance Instructions - Seite/Page 117
Fig. 6.14-3: Electric starter3. Pull off rubber cap.
4. Loosen hex nut with wrench with W.A.F. 13 mm and
remove the electric connections.
Fig. 6.14-4: Electric starter5. Loosen the lower attachment screw with a hex socket
wrench.
Fig. 6.14-5: ToolsTools needed:
01. Socket wrench with long and short extension and size
6 mm socket
To Next Page
Loading...
