5
FERITSCOPE® DMP30 Limitation of liability
2 Limitation of liability
The gauge manufacturer accepts no liability and responsibility for any kind of dam-
age resulting from the use of the corrective diagrams and tables provided in the
chapter "Parameters that influence the Delta-ferrite content measurement". The
user uses the formular, corrective diagrams and tables at their own responsibility.
The manufacturer accepts no liability for damage of any kind caused by read-off er-
rors and unsafe estimates.
The instrument manufacturer does not accept any loyalty and responsibility for con-
clusions drawn from measurements of the -ferrite content (indirect measurement)
and the interpretation of the measurement results.
The manufacturer accepts no liability and no responsibility for the precision, conclu-
sions, and interpretation of the measurement results. Only continuous monitoring of
the measurement devices by the user can guarantee the continued precision of mea-
surements. The manufacturer accepts no liability or responsibility for consequential
damage caused by the use of incorrect measured readings.
3 Description
The FERITSCOPE® DMP30 determines the ferrite content in austenitic and duplex
steel easily, quickly, and in a nondestructive manner. The gauge design with ex-
changeable probes allows a flexible use.
Additional information can be found in the data sheet, from page 16
3.1 Scope of supply
Gauge
Li-ion battery
USB cable type C to type A, 1 m (39.4 ")
Safety information and quick guide
To Next Page
Loading...
