7
FERITSCOPE® DMP30 Description
3.3 Overview of signals
If all signal functions in the gauge are activated, the gauge reports the following
states:
Beeps
Short beep = measured reading acquisition complete, second beep in addition
if the specification limit is violated
Long beep = block closure
Light signals
Specification limit monitoring not active:
Green = measured reading acquisition successful
Specification limit monitoring active:
Red = measured reading outside the specification limits, the measured reading
itself is also displayed in red
Green = last measured reading is within the specification limits
Gauge vibration
Measured reading acquisition completed, second vibration in addition in case of
a specification limit violation or block closure
3.4 Softkey – icons/codes
Forward, skips the next step in the routine
Back
- Returns to the previous menu page, displayed settings are applied
- Moves the cursor to the left, e.g. when the name is entered
Opens the Measurement view
Calls up the calibration (calibration routine) from the Measurement view
Moves the cursor using the arrow keys
- Moves the selection marking
- Increases/decreases the numerical value displayed
To Next Page
Loading...
