FISCHER FERITSCOPE DMP30 - Setting the Decimal Places for the Display Values

83
FERITSCOPE® DMP30 Batch settings
12.4 Setting the decimal places for the display values
For the open batch, you can set the number of decimal places for displaying the mea-
sured reading and for the values of the statistical characteristic variables both in the
Measurement view and in the statistical displays.
Before you start
 The batch for which you want to make the changes is open in the gauge.
To set the decimal places for the display values
1. > Batch Modify > OK > More Settings > OK > Values rounding > OK > select
desired max. number of decimal places > OK
Parameter is selected:
Parameter selection:
- Low: maximum 1 decimal place is displayed
0.9 / 9.9 / 99 / 999 / 9999
- Medium: maximum 2 decimal places are displayed
0.99 / 9.9 / 99.9 / 999 / 9999
- High: maximum 3 decimal places are displayed
0.999 / 9.99 / 99.99 / 999.9 / 9999
2. Exit the menu: , the settings are now made.
[ ]