6
Description FERITSCOPE® DMP30
Lanyard
Gauge case
Fischer-Bluetooth stick
3.2 Gauge
1 Battery compartment lid, Bluetooth in-
terface
2 Light strip for displaying the mea-
sured reading acquisition, specifica-
tion limit violation, battery charge
status
3 Display
4 Operation keys,
: on/off (press for approx. 2 s)
: opens the menu when is not
shown in the bottom line of the display
: navigation and selection keys
The bottom line of the display always shows the function for the keys directly underneath.
The assignment depends on the open page view in the display (example).
5 Gauge foot
6 Probe connection and battery fast charging plug, USB type C
7 USB port, type C, under the sealing tab of the battery cover
8 Shock protection
Gauge dimensions and further properties see data sheet from page 16
Setting values faster
- Measure once on the surface. You can use this value to set the desired value
faster.
- Press and hold the arrow keys or longer.
1
2
3
4
5
6
7
8
8
[ ]
[ ]
OK
To Next Page
Loading...
