21
FERITSCOPE® DMP30
Technical Data
Data transmission
via USB
via Bluetooth® only with Fischer-Bluetooth® stick
Data export via Tactile Suite to Excel® (online, offline)
Data retrival by Tactile Suite: batches, single readings, batch statistics and
block statistics
Test method
on basis of DIN EN ISO 2178 / ASTM D7091 magnetic induction test method
Connectable probes
Digital probes with USB-C female jack, probe names always beginning with the
letter D
Via DMP-F-Probe-Adapter probe FGAB1.3-Fe with 10-pin male jack
At factory each individual probe is adjusted at several reference points with the
greatest care to ensure the highest possible degree of trueness.
Energy management
Power supply: Li-Ion rechargeable battery, model RRC1130
Nominal voltage: 3.8 V=
Nominal capacity: 3880 mA, 14.7 Wh
max. charge voltage: 4.35 V=
max. charge current: 2.4 A
Energy saving for longest battery life
- Automatic gauge switch-off after a preset time period w i t h o u t operation
(key use, data transfer or measurement acquisition)
- Automatic dimming of the display brightness after a preset time period
Battery operating period
> 24 h with continuous measurement and about +20 °C (+68 °F) ambient tem-
perature
Battery charging time
Temperature during charging: 0 … +45 °C (+32 … +113 °F)
about 6 h by default
about 3 h for fast charging
To Next Page
Loading...
