FISCHER FERITSCOPE DMP30 - Measurement View; Display Icons;Codes

9
FERITSCOPE® DMP30 Description
3.5 Measurement view
1 Batch name
2 Specification limits
3 Reading currently being measured
4 Statistical values
5 Key assignment line (example: delete
function, block statistics, calibration
function)
6 Status displays; icons indicate active
autom. gauge shutdown (clock), bat-
tery charge status or the active con-
nection via USB or Bluetooth for
example.
7 Information displays; icons indicate
block closure, set measuring mode,
offset, etc.
8 Unit of measurement
3.6 Display icons/codes
Statistics menu, contains statistical evaluations and displays for the open batch.
Batch Modify menu, contains a list of alterable batch settings
Batches menu, contains a list of batches already created, the New function, for
creating a new batch and the management function for batches already creat-
ed: Rename, Copy and Delete
Calibrations menu, contains a list of calibrations already created, the New func-
tion for creating a new calibration and special functions for calibrations already
created, e.g. Rename, Shortened course and Delete
Gauge Settings menu, contains a list of alterable gauge settings
Indicates additional information
Batch 004
No. 6 n 3
65.04 s 4.77
Min 61.8 Max 71.3
x
71.3
FN
55.0
BLOCK
75.0
Example of the Measurement
view showing statistics with
set specification limits
1
2
3
2
4
5
6
7
8