10
Description FERITSCOPE® DMP30
Indicates warnings
Battery status indicator: fully charged
Battery status indicator: replace battery soon
If the battery voltage is too low, the gauge switches off automatically, measured
readings and settings are retained
Energy-saving function, display dimming active
A period of time for at least one of the energy-saving functions is set.
USB connection active, gauge is connected to a PC via USB, for example
White icon: Bluetooth function is activated in the gauge
Blue icon: active Bluetooth connection, e.g. to a PC
Red icon: the gauge cannot communicate with the inserted Bluetooth stick. In-
sert the Fischer-Bluetooth stick.
Gray icon: the socket in the gauge for the Fischer-Bluetooth stick is empty, but
the Bluetooth function is switched on.
Free Running measuring mode active
Unlimited, Limited Number or Limited Number Block scan mode is active, de-
scription of scan modes 38
Counted Average scan mode active
Measured reading acquisition until the probe is lifted off, storage of the arith-
metic mean over the acquired measured readings
Indicates a block closure, appears with the last measured reading of the block
Offset function is active
The automatic storing of measured readings is deactivated
On/Off switch, – parameter/function is activated
O
To Next Page
Loading...
