FISCHER FERITSCOPE DMP30 - Menus - Function Overview

12
Description FERITSCOPE® DMP30
3.7 Menus – function overview
Menu Statistics
View of the statistics for the open batch
Batch Modify menu
Settings and entries for the open batch
 Batch Modify > MEASURE
Opens the Measurement view, starts the measurement with the probe posi-
tioned on the specimen surface
 Batch Modify > Limits
Activates limit monitoring and sets the specification limits
 Batch Modify > Batch Info
Information on the measurement and batch settings
 Batch Modify > Views Settings
- Measurement view: selects the display
- Batch statistical display: selects the statistical characteristic variables to be
displayed
- Block statistical display: selects the statistical characteristic variables to be
displayed
 Batch Modify > Meas. unit
Sets the unit of measurement
 Batch Modify > Block Size
Activates automatic block formation and set the block size
 Batch Modify > Offset
Sets the offset value
 Batch Modify > More Settings > Measure Mode
Sets a measuring mode (single reading, free-running, scan)
 Batch Modify > More Settings > Values rounding
Sets the number of decimal places for the values displayed
 Batch Modify > More Settings > Save Readings
Saves measured readings (yes/no)
 Batch Modify > More Settings > Air Reference
Sets the acquisition method for the air reference value