75
FERITSCOPE® DMP30 Data transfer
11 Data transfer
Data export is possible only from the gauge to the Tactile Suite software program.
Individual measured readings, batch statistics, block statistics and the entire batch
can be exported to Tactile Suite.
Tactile Suite is a software solution for evaluating measured readings, creating in-
spection reports, archiving measured readings, inspection reports and batch files,
and for exporting measured readings in CSV format.
You can download the Tactile Suite program free of charge from the Fischer down-
load page.
Information on how to use the Tactile Suite software program can be found in the
corresponding Operator's Manual ( Tactile Suite).
Fischer download page:
https://docs.helmut-fischer.com/poy
Notes on data transfer
Calibration data cannot be transferred.
Interfaces: USB and Fischer-Bluetooth® stick
You can write the measured readings directly into an Excel spreadsheet
online via Tactile Suite during the measurement.
To Next Page
