92
Service FERITSCOPE® DMP30
15 Service
15.1 Gauge cleaning
Switch off the gauge before cleaning it!
Cleaning the gauge
► Simply wipe away normal soiling, such as dust, with a damp cloth.
► Wipe away oily deposits with a dry cloth and then clean the spots with plastic
cleaner or household detergent.
► Remove paint and lacquer using a solvent. Use solvents such as acetone,
methyl ethyl ketone, turpentine oil, or xylene to clean the gauge.
ATTENTION – Damage to the gauge/probe
Do not clean the gauge/probe under running water!
IP64 ≠ water-proof, gauges in protection class IP64 are resistant only to
splash water. IP64 refers to the ability to withstand dust and clear water.
Gauges/probes are not waterproof and cannot withstand constant water
pressure! No protection in salt water and other liquids, especially soapy
water, alcohol and/or heated liquid.
Scratches on the display
Cleaning the display with a dry cloth can scratch the display.
To Next Page
Loading...
