13
FERITSCOPE® DMP30 Description
Batch Modify > More Settings > Calibration Assign
Assigns a different calibration
Menu Batches
Batches > New, starts a routine for creating a new batch in the gauge.
Batches > List containing the batches stored in the gauge;
After a batch has been selected, it can be opened, renamed, copied, or deleted.
Menu Calibrations
Calibrations > New, starts a routine for creating a new calibration in the con-
nected probe.
Calibrations > List containing the calibrations stored in the connected probe;
After a calibration has been selected, the following functions are available:
- CALIBRATE
Starts the calibration routine for the selected calibration
- Rename
Renames the selected calibration
- Def. Cal. Check
Defines test settings for checking the selected calibration
- Check Calibration
Starts the checking procedure for the selected calibration
- Lock Calibration
Locks the selected calibration, possible only with a pre-defined lock code
- Shortened course
Activates a semi-automatic calibration routine
- Reset
Deletes all coating thickness correction values from the selected calibration
- Delete
Deletes the selected calibration from the probe memory
- Info
Displays information about the selected calibration
To Next Page
Loading...
