14
Description FERITSCOPE® DMP30
Gauge Settings menu
Gauge Settings > Language
Selects the display language
Gauge Settings > Display Settings
Activates/deactivates display flip function and display brightness
Gauge Settings > Signal Settings
- Audible signal on/off
- Activates/deactivates the visual signals and sets the luminosity
- Vibration on/off
Gauge Settings > Energy Savings
Activates automatic gauge shutdown and display dimming after a preset period
of time
Gauge Settings > Bluetooth
Data transfer via Bluetooth on/off;
NOTE: A data transfer via USB and Bluetooth is possible only for evaluation pur-
poses using Tactile Suite archiving software.
Gauge Settings > Date & Time
Sets the date and time, and also the date and time format
Gauge Settings > More Settings
- Preset rounding
Number of decimal places for the values displayed, default for creating the
batch
- Define Lock Code/Delete Lock Code
Activates/deactivates the lock code for locking the calibration
Gauge Settings > Probe - Menu
- Set Power Line Frequency
Adjusting the frequency of the local voltage supply to compensate for the
interference radiation emanating from the local voltage supply increases
the measuring performance
- Delete all calibrations
Deletes all calibrations from the memory of the connected probe; NOTE: You
cannot measure without a calibration!
Gauge Settings > About
Information about the firmware version, copyright and connected probe
To Next Page
Loading...
