8
Description FERITSCOPE® DMP30
Calls up the Delete function
Opens another menu page
Scrolls, displays the next page
Run
- Confirm the message/information
- Starts the function (e.g. Delete function)
Cancels the setting process and exits the function or returns to the previous
page without saving any changes
CLOSE Sets a block closure when the block statistics are exited; available only
when automatic formation is deactivated
BLOCK Calls up the block statistics for the current measured reading block
OK Confirm
- Confirms the selection/setting/information
- Moves the cursor to the right, e.g. when entering a name
STD Calls up the page for entering the nominal value of the calibration foil/cali-
bration standard used
To Next Page
Loading...
