FISCHER FERITSCOPE DMP30 - Page 26

20
FERITSCOPE® DMP30
Technical Data
 Dynamic: automatic acceptance of the air value always when the probe is lifted
from the surface, default mode
 Static: no automatic acceptance of the air value always when the probe is lifted
from the surface. In this case, the air reference value must be measured man-
ually at regular intervals. This may be useful for measurements in small cavi-
ties or pipes where the minimum lift-off distance of the probe cannot be main-
tained within cavity/pipe.
General Features
Measurement views
 Simple: the measured reading with the set measurement unit is displayed only;
additionally with display of the limit values if set
 Statistics: the measured reading with tabular measurement statistics
Languages
Many different display languages, beside German and English several other Eu-
ropean and Asian languages
Date & Time
 settable
 Date and time formats settable (DD.MM.YY or MM/DD/YY and 12 h or 24 h)
Storage space
 Number of batches: ≤ 2500
 Total number of measured readings: ≤ 250000
 Number of blocks per batch: ≤ 10000
 Number of measured readings per block: ≤ 10000
Evaluation
 Batch statistics, evaluation of all stored measured readings of one batch
 Block statistics, evaluation over the grouped measured readings, evaluation
per block
 Graphical presentation of measured readings, histogram of all measured rea-
dings of one batch, from 5 readings