80
Batch settings FERITSCOPE® DMP30
Measurement View
Type of Measurement view set for this batch (Simple, Statistics).
Meas. unit
FN (example)
Block Size
Number of measured readings collected in a block.
Offset
Information about the offset: off or set offset value.
Measure Mode
Information about the set measuring mode: Single Readings, Free Running or Scan
with the set scan parameters
Values rounding
Information about the resolution of the displayed values: number of decimal places
used to display the measured reading and the statistical values.
Save Readings
Information indicating whether this function is activated or deactivated for this batch.
Air Reference
Information indicating how the probe acquires the air value for this batch (Dynamic,
Static).
To Next Page
Loading...
