What does Er29 mean on FISCHER Measuring Instruments?
If your FISCHER Measuring Instruments display shows 'Er29', it means that a locked function has been called. Set the function free again in instrument setting menu 1, 33.
What does Er1 mean on FISCHER PERMASCOPE MP0R?
If your FISCHER Measuring Instruments display shows 'Er1', it indicates an internal error. Perform a normalization. If the error occurs repeatedly, contact Fischer servicing.
What does Er17 mean on FISCHER PERMASCOPE MP0R?
If your FISCHER Measuring Instruments display shows 'Er17', it signifies that not enough readings have been taken, specifically that the calibration foil has been measured only once. At a minimum, two measurements are necessary. For better calibration precision, it is recommended to perform 5 to 10 measurements on the calibration foil.
General| Brand | FISCHER |
|---|---|
| Model | PERMASCOPE MP0R |
| Category | Measuring Instruments |
| Language | English |
Details the applications for DUALSCOPE, ISOSCOPE, and PERMASCOPE MPOR models.
Identifies front and rear view components of the MP0R instrument.
Explains the meaning of various symbols shown on the instrument display.
Lists and explains the function of each key on the instrument.
Provides a visual overview of the instrument's main menu structure.
Instructions on how to power on the instrument.
Explains how to turn off the instrument and mentions auto-switch-off.
Procedure for manually turning off the instrument.
Instructions on how to disable the automatic power-off feature.
Explains signal indications for measurement acceptance and limit violations.
How to navigate through stored measurement data.
Introduces normalization and corrective calibration types.
Important considerations for performing calibration accurately.
Details the procedure and requirements for normalization.
Explains the process and requirements for corrective calibration.
How to reset or restore calibration settings to default.
Procedure for removing the most recent measurement.
Instructions for clearing all stored measurement data.
How to define upper/lower limits and offset for measurements.
Procedure to remove previously set specification limits and offset values.
Steps required before transmitting data to a PC.
Instructions for transmitting measurement data to a PC.
How to send average measurement values to a computer.
How to use group separators for data organization during transmission.
Guide on how to navigate and access the instrument's setting menus.
Overview and details of various configurable settings like measurement modes, data storage, transmission, and resets.
Explains common error messages and provides solutions for instrument issues.
Solutions for common problems encountered during USB data transmission.
General specifications applicable to all MP0R and MP0R-FP instrument models.
Detailed technical specifications tailored for specific instrument models.
Lists instrument models and their corresponding part numbers for ordering.
Lists available accessories and spare parts with their part numbers.
Instructions and precautions for the safe disposal of batteries and electronic equipment.
To Next Page
