150718 PLYFLY rev A_GoKart | Aug ust 7, 2 015 5 :08 PM
Chapter 10
1
PART
Recommended tools
DESCRIPTION REFERENCE
Dead blow Hammer
or mallet
Allen Wrench
Socket Wrench
Required hardware
№ DESCRIPTION REFERENCE
1 Sprocket
5/8” bore diameter
60 Tooth, #35 Chain
P N 1252 2
1 Drive Shaft
Steel, Keyed, 5/8” D, 18” L
SINGLE WHEEL KIT P N 125 8 0
1 Drive Shaft
Steel, Keyed, 5/8” D, 33” L
LIVE AXLE KIT – 10” WHEELS P N 125 81
1 Drive Shaft
Steel, Keyed, 5/8” D, 36” L
LIVE AXLE KIT – 12” WHEELS P N 12 58 2
1 Brake Disc
P N 125 32
1 Brake Disc Hub
P N 125 33
1 Long Hex Bolt
Axle Grade 5, 5/8”‑11, 11” L
SINGLE WHEEL KIT P N 125 02
4 Button Socket Head Cap Screw
Zinc Plated, Steel, 5/16”‑24, 1/2” L
TOTAL OF 4 PROVIDED PN 125 59
4 Thin Nut
Grade 5, 5/16”‑24
P N 1252 0
1 Key
3/16” square, 1”L
P N 125 39
Note There are 2 types of button socket head cap screws
provided in every kit. They appear to be similar in
size but are not. The easiest way to dierentiate the
2 sizes, is by the number of screws provided.
42
10 Putting the go‑kart together
To Next Page
Loading...