FLUXUS ADM 8027, F801, ADM 8127B 14 Data Logger and Transmission of Data
98 UMFLUXUS_F8V4-6-1EN, 2018-10-10
Storing of the Signal Amplitude
Storing of the Sound Speed of the Fluid
Storing of the Diagnostic Values
Acoustic Signal during the Storing
Per default, an acoustic signal will be emitted every time a measured value is stored or transmitted to a PC or printer. The
signal can be deactivated in Special Funct.\SYSTEM settings\Storing\Beep on storage.
14.1.4 Measurement with Activated Data Logger
• Start the measurement.
If Output Options\Store Meas.Data has been activated and Special Funct.\Ringbuffer\ is deactivated, this
error message will be displayed as soon as the data logger is full.
Th Storing will be stopped.
14.1.5 Deleting the Measured Values
14.1.6 Available Data Logger Memory
If the data logger is empty and a measurement is started with one physical quantity on one measuring channel without
storing the totalizer, approx. 100 000 measured values can be stored. The available data logger memory can be dis-
played:
If on is selected and the data logger is activated, the amplitude of the measured signal will
be stored together with the measured values. Press ENTER.
If on is selected and the data logger is activated, the sound speed of the fluid will be stored
together with the measured values. Press ENTER.
If on is selected and the data logger is activated, the diagnostic values will be stored to-
gether with the measured values. Press ENTER.
Select off to deactivate the acoustic signal, on to activate it. Press ENTER.
Enter the measuring point number. Press ENTER.
If arrows are displayed in the lower line on the right, ASCII text can be entered. If digits are
displayed, only digits, point and hyphen can be entered.
For the setting of the input mode see section 16.2.3.
Press ENTER.
The error message will be displayed periodically.
Select Special Funct.\Delete Meas.Val.. Press ENTER.
Select yes or no. Press ENTER.
Select Special Funct.\Instrum. Inform.. Press ENTER.
A:Meas.Point No.:
xxx (↑↓← →)
Special Funct. ↕
Delete Meas.Val.
Special Funct. ↕
Instrum. Inform.
To Next Page
Loading...
Need help?
General
