FLIR DM286 - Screen Brightness Setting; Log Sampling Rate Setting; Information Menu; System Information

FLIR DM286 USER MANUAL Document Identifier: DM286-en-US_AA
22
7.2.3.7 Screen Brightness Setting
As shown in Fig. 7.14, below, scroll to the desired brightness level and press OK
to confirm.
Fig. 7.14 Screen Brightness Setting
7.2.3.8 Log Sampling Rate Setting
As shown in Fig. 7.15, below, scroll to the desired rate at which the meter will
log readings (from 1 to 100 seconds) and press OK to confirm.
Fig. 7.15 Set Data Logger Sampling Rate
7.2.4 Information Menu
In the Information Menu you can review system information and revert the meter
settings to their factory default settings.
7.2.4.1 System Information
As shown in Fig. 7.16, below, view the meter’s system information: model and
serial numbers, software/firmware/Bluetooth versions, available internal
memory, and battery power level (%).
Fig. 7.16 System Information