Connecting Cameras to the Local Area Network (LAN)
22
2. Log in using the admin account (default User Name: admin and your new, secure
password).
3. Click Device Search. The system searches the network for compatible cameras.
4. Check the camera(s) you would like to add.
5. Click Add. The Status indicator turns green to show the camera is successfully
connected.
NOTE
If the status indicator turns red, click
. Update the camera user name, password, ports, and
manufacturer as needed.
6. Right-click to return to live view.
NOTE
You can also add a camera to a specific channel by hovering the mouse over an empty channel in split-
screen view and clicking
. Then double-click the camera you would like to add and right click to exit.
#LX400096; r.45547/45547; en-US
171
To Next Page
Loading...
Need help?
General
