FLIR X-Series User Manual

8 – Specifications
X-series User’s Manual 83
8 Specifications
8.1 Interface
AC Power
90-230V
AC
, 50-60 Hz (using FLIR 24123-000 power supply)
Control
Gigabit Ethernet, USB, Camera Link Serial, CXP or RS-232
Standard Video Outputs
(where applicable)
• NTSC/PAL selectable, BNC, 75Ω, 1V pk-pk
• HDMI (720p 50/59.94, 1080p 25/29.97)
• HD-SDI (720p 50/59.94, 1080p 25/29.97)
Frame Sync In
TTL singled ended, BNC, selectable polarity, >160ns pulse width
Frame Sync Out
TTL singled ended, BNC, selectable polarity, 160ns pulse width
Trigger In
TTL singled ended, AUX, selectable polarity, >160ns pulse width
Integration Out
TTL singled ended, AUX, selectable polarity
Genlock In
SD: Composite sync input, field and lines sync of video output
HD: HD-SDI or Tri-level Sync
IRIG-B in
IRIG-B-AM, B122 format, BNC
Digital Video Out
14-bit Camera Link Full, and Gigabit Ethernet, Dual-link CXP @
5Gbps
Optical Interface
FLIR HDC bayonet
Thermal Interface
Sealed enclosure with integral forced air heat exchanger; bottom
mounting surface provides direct heat path for low atmospheric
pressure environments
Mechanical Interface
2 (two) ¼-20 tripod screws; 1 (one) 3/8-16 professional tripod
screw; 4 (four) 10-24 mount holes. 3x ¼-20 screws each side
8.2 Windowing Capacity
Minimum Window Size
X6800/X6900: 32 columns x 4 rows
X8500: 64 columns x 4 rows
Windowing Step Size
X6800/X6900: 32 columns x 4 rows
X8500: 64 columns x 4 rows
Maximum Window Size
X6800/X6900: 640 columns x 512 rows
X8500: 1280 columns x 1024 rows
Window Offset Step Size
32 columns; 4 rows

FLIR X-Series Specifications

General

Brand	FLIR
Model	X-Series
Category	Digital Camera
Language	English