Victor Xu Page 35 12 Jan. 2011
Copyright 2011 © Shenzhen Runtianzhi Image Technology, Co., Ltd.
http://www.floradigital.com
4.5.7 Individual purge system
Individual purge system allows for easy convenient respective maintenance of print head,
which will help saving ink also.
4.6 Vacuum system
4.6.1 Variable Vacuum Control System
The variable vacuum control system allows users to change the vacuum area to match the
media width to achieve the best vacuum efficiency and keep the edge of substrate from cocking.
4.6.2 Vacuum Chamber
The whole flatbed is divided into four areas. Refer to 3.4.5.
4.7 Curing system
4.7.1 Overheat protector
Overheat protector is a device to protect the UV lamp from being damaged because of high
temperature.
When the temperature in the UV house is higher than 100°C， the UV lamp will shut off
automatically. This will last the service life of UV lamp.
Positive position
Ne
ative
osition
Swap switch
Overheat Protector
To Next Page
Loading...
