EasyManua.ls Logo

FLORA pp2512uv - Chapter 1 - Safety Operating Instructions; General Safety Information

FLORA pp2512uv
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Victor Xu Page 8 12 Jan. 2011
Copyright 2011 © Shenzhen Runtianzhi Image Technology, Co., Ltd.
http://www.floradigital.com
Chapter 1 - Safety Operating Instructions
1.1 Brief Introduction
This chapter introduces the important safety information. Please read and understand the safety
information carefully before operating the printer.
1.2 Safety Information
FLORA printer uses the following chemical substances
All kinds of printing media
UV Ink
Cleaning liquid (UV Flush)
1.2.1 Solvent and Ink Properties
Solvent and Ink are flammable.
Eye contact with the ink and solvent will break the cornea and weaken the eyesight.
Contact lens should not be worn when operating printer or when there is no proper
ventilation.
Wear safety glasses and gloves while flushing print heads, ink tube or moving the
ink bottles or containers.
Solvent and ink can be irritating to eyes, throat and skin. Inhaling the ink fumes
would result in swoon or other symptoms.
Solvent vapors are heavier than air and may flow and gather in low spot.
1.2.2 Danger of Fire and Explosion
1.2.3 Anti-ultraviolet radiation
1.2.4 Proper Ventilation and Exhaust System
This caution symbol represents danger. If this sign is ignored it
may lead to serious injury or damage to the printer.
Open flames, heat energy or spark around the printer can trigger fire and explosion.
No smoking, pilot lights, open flames, stoves, heaters or halogen lights should
be turned on within 5m distance from any edge of the printer.
No portable spark-producing equipment (static, electrical or Mechanical) within
5m distance from any edge of the printer.
Wear UV protection glasses and gloves when operating the machine and
avoid being too closer to UV lights.
When doing maintenance task or being close to the flatbed machine, U
V
lights must be shut off or close all UV protection doors.
The vacuum exhaust system must be functioning before the printer operates.
Do not ignore this safety warning sign to avoid accumulation of flammable
fumes in the area.

Table of Contents

Related product manuals