- 58 -
Context… Flow Cell
Flow cell
Flow Cell Type – From the available menu, select the part number of the flow cell currently in use. The
Flow Cell Depth and the Flow Cell Width will automatically populate. These measurements can be
adjusted if necessary. See Appendix I for a chart of the flow cell types (which are also the part numbers
for the flow cell) and specifications.
Tubing – The Tube inner diameter value will automatically populate with the diameter once a flow cell
type is selected. When using the syringe pump the tube lengths are critical for precise fluid
measurements. The user will need to measure and enter the correct values for the tube lengths (cm) both
above and below the flow cell. See below for an example using a 100 µm flow cell.
To Next Page
Loading...
