Appendix A: Log Messages for Connections that Fail
107
802.1X: Server certificate unverified
Ignore this message if you did not select the option Check Server
Certificate in the profile in AirCheck Manager.
802.1X: Server certificate is bad
The option Check Server Certificate was selected in the profile in AirCheck
Manager, but an incorrect certificate was loaded into the tester.
DHCP: Timeout occurred
(without the message DHCP: Success after this
one)
•
The access point could not communicate with the external DHCP server.
•
The access point has an internal DHCP server, but it is disabled.
•
The DHCP server is at its limit for the number of users.
•
The tester and the access point are both configured for WEP security,
but they have different key settings.
DHCP: No offer received
When this follows the message DHCP: Timeout occurred, see the causes
above.
Static IP: ARP received. Address already in use
The option Manual (Static) was selected in the profile in AirCheck
Manager, but a duplicate IP address was found on the network.
Message Possible Reasons for the Connection Failure
To Next Page
Loading...
