What You Can Learn About Your Network
17
Can Devices Connect to My Network?
Use the tester to verify connectivity.
Note
To connect to a secure network, the tester must have a profile that includes
security credentials. If credentials are not available, the softkey shows as
Connect*.
See page 29.
Can a device connect as a client to my
network (SSID)?
Select Networks, highlight a network, then press Connect. See page 68.
Can a device connect to an access point
(BSSID)?
Select Access Points, highlight an access point, then press Connect. See
page
68.
If a device cannot connect to a network
or access point, where does the
connection procedure fail?
Look at the connection log. See page 71.
Can a device ping a network device? Do a ping test. See page 72.
Does the network interface card in a
client operate correctly?
From the home screen, select Clients to see if the client transmits probe request
frames and to see basic settings such as the channel and SSIDs the client uses in
probes. See page
76.
To Next Page
Loading...
