Fluke AIRCHECK - Managing Network Connections

AirCheck Wi-Fi Tester
Users Manual
32
To delete a profile
1 Select Tools > Manage files.
2 Select Delete file.
3 Select the PROFILES folder.
4 Highlight the profile and press L.
5 Press Delete.
Configure a Network (SSID)
You have the ability to configure a Network (SSID) that uses
DHCP or Static addressing.
There are two main parts to configuring a Network (SSID)
and these are 1) Setting up IP configuration and 2) Setting
up security credentials (authentication).
Part 1- Setting up IP Configuration
1 Select Tools > Manage profiles / network passwords.
2 Highlight Edit networks and press L.
3 Press  Add.
4 Enter your network’s SSID and press  Create.
To select individual letters, use  and   to
navigate to a character, then press L, repeat the
process for every character. To enable the Caps Lock,
select either capitalized “A-Z” key. To add a numeral or
a symbol, navigate to the left shift key and press
L.
5 On the Edit Network Info screen, highlight your
network’s name and press L.
6 Highlight IP Configuration and press L.
7 Select DHCP or Static IP Address and press L.
8 If you chose DHCP, press  Done.
9 If you chose Static IP Address, you will need to provide
an IP Address.
To select an address, press the  key to navigate to
your selection and press
L. For now, you want to reach
IP Address.
10 Specify a static IP address and press  Done.
Use the  to scroll to the desired numeral. Press the
 key to navigate to the right or the  key to navigate to
the left.