AirCheck Wi-Fi Tester
Users Manual
12
What You Can Learn About Your
Network
What is the Health of My Network?
How is my Wi-Fi Air Quality?
Are my channels overloaded with
access points and Wi-Fi traffic?
Are any of my channels too noisy?
Select AutoTest - After the AutoTest has run, select Air Quality to view the
results of 802.11 Channel Utilization, Non-802.11 Channel Utilization, and Co-
Channel Interference health assessment.
The 802.11 Channel Utilization results include the top three channels having
the most Wi-Fi traffic. The channel utilization value along with the rating of
Pass, Warning, or Fail, is displayed. The test rating is based on a
comparison of the actual value to user settable thresholds. These thresholds
are configured in the Tools > Thresholds / AutoTest Settings.
To see the current AutoTest thresholds used to grade results, press
Thresholds on the AutoTest (results) screen.
To Next Page
Loading...
