Fluke AIRCHECK - Manage Files on the Tester

Manage Files on the Tester
89
Manage Files on the Tester
To rename a file
1 Select Tools, then select Manage files.
2 Select Rename file.
3 Highlight a file, then press L.
4 To edit the filename, press  Edit.
Note
Sessions must have the extension “.ACS” and
profiles must have the extension “.ACP” if you
want to see them in AirCheck Manager.
• To delete characters in the filename, press 
Delete.
• To add characters to the filename, use    to
highlight a character, then press
L.
• To move the cursor in the filename, highlight the
filename, then press  .
5 To rename the file with the name you made, press 
Done, then press
 Rename.
To delete a file
1 Select Tools, then select Manage files.
2 Select Delete file.
3 Highlight a file, then press L.
4 Press  Delete.
To see how much space is available in memory
1 Select Tools > View AirCheck information.
2 View Memory Used %.
or
Use the USB cable supplied with the tester to connect the
tester to the PC, then use one of these procedures:
• Start AirCheck Manager, select AirCheck > View
Information, then look at the Memory Used graph.
• Use the file browser in the PC operating system to see
how much memory space is available on the tester.
If memory is full, the tester shows Memory full when you try
to save a file.