Set Up the Tester
31
To save the current settings as a profile
1
Select Tools > Manage profiles / network passwords,
then select Save profile.
•
To save the profile with the filename shown, press
Save. The tester saves the profile in the
“PROFILES” folder.
•
To overwrite a profile that is saved on the tester,
highlight the profile, press
L, press Save, then
press OK.
•
To edit the filename, press Edit.
Note
File names can have a maximum of 8 characters
with an extension of 3 characters. The extension
must be “.ACP” if you want to see the profile in
AirCheck Manager.
•
To delete characters in the filename, press
Delete.
•
To add characters to the filename, use to
highlight a character, then press
L.
•
To move the cursor in the filename, highlight the
filename, then press .
•
To save the profile with the edited filename, press
Save. The tester saves the profile in the
“PROFILES” folder.
To Next Page
Loading...
