Fluke AIRCHECK - Page 117

109
Appendix B: Default Settings
This appendix shows the default settings for the tester when
you select Tools > Restore factory defaults.
Function Default Setting
Profile that the tester uses
Default
Auto shutoff
On
Language
The language that
was selected last
Country
US
Sound for the AP Locate function
On
Thresholds for Bar Graphs
Signal Level: Red
-85 dBm
Signal Level: Yellow
-75 dBm
Signal Level: Green
-65 dBm
Noise Level: Red
-65 dBm
Noise Level: Yellow
-72 dBm
Noise Level: Green
-80 dBm
Signal-to-Noise Level: Red
10 dB
Signal-to-Noise Level: Yellow
17 dB
Signal-to-Noise Level: Green
25 dB
Network coverage:
2 APs
802.11 Utilization level: Green
40%
802.11 Utilization level: Yellow
55%
802.11 Utilization level: Red
70%