Safety Information
5
•
Read all safety information before you use the
Product.
•
Carefully read all instructions.
•
There are no user servicable parts inside.
•
Do not modify the Product.
•
Use only replacement parts that are approved by
Fluke Networks.
•
Do not touch voltages > 30 V AC rms, 42 V AC peak, or
60
V DC.
•
Use only Fluke approved power adapters to charge
the battery.
•
Do not use the Product around explosive gas, vapor,
or in damp or wet environments.
•
Examine the case before you use the Product. Look
for cracks or missing plastic. Carefully look at the
insulation around the terminals.
•
Use this Product indoors only.
•
For Products that have multiple connectors for
different types of tests on copper cabling, disconnect
unused test leads from the connectors before you do
a test.
•
Use the Product only as specified, or the protection
supplied by the Product can be compromised.
•
Do not use and disable the Product if it is damaged.
•
Do not use the Product if it operates incorrectly.
•
Batteries contain hazardous chemicals that can cause
burns or explode. If exposure to chemicals occurs,
clean with water and get medical aid.
•
Remove the batteries if the Product is not used for an
extended period of time, or if stored in temperatures
above 50 °C. If the batteries are not removed, battery
leakage can damage the Product.
•
The battery door must be closed and locked before
you operate the Product.
•
Repair the Product before use if the battery leaks.
•
Replace the batteries when the low battery indicator
shows to prevent incorrect measurements.
•
Turn off the Product and disconnect all cables before
you replace the battery.
•
Be sure that the battery polarity is correct to prevent
battery leakage.
IC Statement (continued)
Use of any other antenna is strictly
prohibited for use with this product.
L’émetteur radio a été approuvé par
Industrie Canada pour fonctionner
uniquement avec l’antenne fournie.
L’utilisation de toute autre antenne est
strictement interdit d’utiliser ce produit.
To Next Page
Loading...
