Fluke AIRCHECK - Page 45

Set Up the Tester
37
Thresholds /AutoTest
Settings
(continued)
Air Quality co-Channel Interference threshold - Multiple APs on same channel interfere. Seen
in the Air Quality screen.
Network Quality co-channel threshold - APs matching SSID overlap on channel. Seen in the
Network Quality screen under Connection Details.
Retry rate threshold - Percent of ping packets resent during the ping test. Seen in the
Network Quality screen under Connection Details.
Connected Packet Rate Level threshold - Packet rate percent of the AP maximum supported
rate, i.e., actual/max = %. Seen in the Network Quality screen in Connection Details.
Minimum signal threshold - Co-channel interference tests ignore APs below this signal level.
Seen in the Network Quality screen under Connection Details and Air Quality Co-Channel
Interference results.
Manage Files Rename file - Allows you to rename Profiles and Session files.
Delete file - Allows you to delete Profiles and Session files.
Note
Current measurements are saved to a session file by pressing P .
Table 2. Settings on the Tools Menu (continued)