AirCheck Wi-Fi Tester
Users Manual
42
Brightness and Auto-Shutoff Dim display brightness - Allows you to set the display brightness for low light use. Check the
box and select Save to change the setting
Auto-shutoff enabled - When enabled, the tester turns off automatically after 10 minutes
of inactivity (no key pressed). The tester does not save the test session when it turns off
automatically. It does save changes you made to the profile. The tester does not turn off
automatically if the AC adapter is connected. To save your setting, press
Save.
To exit and not save your setting, press Cancel.
Restore factory defaults Makes all settings go back to default values. See Appendix B.
Erase All Clears all data on the tester including profiles and saved session data.
Table 2. Settings on the Tools Menu (continued)
To Next Page
Loading...
