Fluke etherscope II User Manual

EtherScope™ Series II
Getting Started Guide
116
4. To access real-time reports:
a) Click .
The EtherScope Real-Time Reports screen is
displayed.
b) Locate the report that you want to view, and
then click a link to display it.
5. To access saved reports:
a) Click .
The EtherScope Real-Time Reports screen is
displayed.
b) Click View Saved Reports.
c) Select the saved report that you want to view,
and then follow the link to view it.
User Interface Events that will Terminate a Remote
Session
The active TCP/IP session between the remote user
interface software and the instrument can be severed
under the following conditions:
• If IP parameters are manually changed on the
instrument and Apply is selected on the Instrument
Settings—TCP/IP screen
• If the Start Test button is selected on the Cable
Verification Details screen.
• If the Start Test button is selected on the Signal
Verification Details screen.
• If the instrument’s MAC address is changed in the
Instrument Settings—Ethernet screen.
• If the Ethernet link goes down.

Fluke etherscope II Specifications

General

Brand	Fluke
Model	etherscope II
Category	Measuring Instruments
Language	English