EtherScope™ Series II
Getting Started Guide
126
Datalink Signal
500mVp-p to 4000mVp-p
Measuring Terminated Cables
Cable Verification tests individual twisted-pairs of a cable that are terminated into most equipment vendors’ Ethernet ports,
such as on a hub, switch or NIC.
All cable tests other than WireView wiremap and office locator ID are operational in the presence of datalink signal.
Fault Tolerance
The RJ-45 10/100/1000 BASE-T Ethernet connection on the instrument is designed to withstand a maximum of 100 volts.
WireView Wiremap Adapter/Office Locator Compatibility
Detects combinations of shorts, opens, and connector miswires. Compatible with Fluke Networks WireView wiremap
adapter/office locator.
To Next Page
Loading...
