Use the buckles to adjust the length of the hand straps. When the size of the hand straps is cor-
rect, use the Velcro fasteners to wrap the straps. This gives you a reliable and comfortable
grip.
Use the buckles and the two Velcro fasteners to adjust the length of the shoulder strap to the
required size.
Use the snap hooks and attach the shoulder strap to the hand strap eyelets. Use any two diag-
onally positioned eyelets. This makes left- or right-handed operation possible.
Note:When the device is carried with either the hand straps and/or the shoulder straps,
the display must face the operator. This makes sure that the device cools as required,
and meets radio transmission requirement. Also, the display is protected.
18 Version:1.0
On-board help
To Next Page
Loading...
