Routes
How to measure a route
A route is a compilation of measure tasks that are done at regular intervals. Routes are cre-
ated in Emaint Condition Monitoring, a cloud-based software, then measured with VIBXPERT
3. To transfer routes from Emaint Condition Monitoring to VIBXPERT 3, a login account is cre-
ated in VIBXPERT 3 (see Settings).
A route can be measured in the specified sequence or in any order. The measure process can
be interrupted at any time, and started again later. Individual elements within the route can be
skipped if an aggregate is not in operation. The skipped measure tasks are recorded and taken
into account when number of machines scheduled to be measured are shown. After the route
has been measured, measured data is transferred automatically to Emaint Condition Mon-
itoring if Wi-Fi connection to the internet is available. Measured data is then available in
Emaint Condition Monitoring for evaluation.
NOTE: Measured data is transferred to Emaint Condition Monitoring as soon as all test points
on an individual machine have been measured. In this way, all relevant measured data is trans-
ferred to Emaint Condition Monitoring in one go to make sure that the evaluation is correct.
This also makes sure that data transfer is quick.
76 Version:1.0
On-board help
To Next Page
Loading...
