Ford F-MAX - Auto Cancellation; Resuming the Set Speed

4
OPERATION
- 104 -
The selected distance is shown as a bar
graph in the information display. You may
select four distance values.
Graphic
Display,
Distance
Between
Vehicles is
Displayed With
Bars
Distance
Between
Vehicles
Dynamic
Action
1 Closest. Sport.
Emergency
Management
Close. Normal.
3 Medium. Normal.
4 Distant. Comfort.
The distance setting is set to Medium
whenever you turn the ignition on.
Cancelling the Set Speed
WARNING
If you deactivate the system by pressing
the accelerator pedal, it shall not brake
automatically to maintain the distance
from the vehicle in front of you.
Use the accelerator pedal in a normal way
to exceed the set speed limit deliberately.
Set Speed is displayed as invalid when you
disable the system.
The system continues to work when you
release the gas pedal. The vehicle speed
falls to the set speed or falls to a lower
speed if you are following a slower vehicle.
Changing the Set Speed
Press the button down to decrease
the set speed.
The set speed changes in small
increments.
Note: Press and hold the button up or
down to change the set speed at larger
increments.
The system may apply brakes to bring the
vehicle to the new set speed. When the
system is activated, the set speed value is
continuously displayed on the information
display.
Cancelling the Set Speed
Press and release the switch or
press the brake pedal.
The last set speed and distance setting
are displayed in grey, but they do not
disappear from the screen.
Resuming the Set Speed
Press and release the switch.
The vehicle of your speed returns to the
previously set speed and distance. The
set speed is displayed on the information
display as long as the system is active.
Note: Resume the set speed if you know
the set speed and want to use this speed
only.
Auto Cancellation
The system shall not operate at speeds
below 30 km/h. If the vehicle in front is
slower and the system starts to apply
brakes to adjust the distance, a warning
buzzer is sound and the automatic braking
is continued in limited braking mode.
The system may also be deactivated
automatically in the following situations:
• When you shi to neutral
• When you disable ESP
• When the wheels slip.
• When the engine speed is too low.
• When you apply the parking brake.
• When you activate the auxiliary brakes
manually.
• When there is a fault in the brake
system/electronic management system
Driving