MAINTENANCE AND SERVICE
5
- 168 -
Wheel position replacement
Wheel surfaces of your vehicle are
polished specially and coated with
protective transparent paint.
Use your wheels in their original positions
only.
Or observe the following replacement
chart. A wheel replacement other than the
application specifi ed below shall cause
appearance problems.
CAUTION
As seen in the table, relocating your tyres
at every 40,000 km will enhance the
product life of your tyres.
Wheel Chock
There are 2 wheel chocks, right and le ,
in the area where the vehicle has rear
fenders.
The wheel chock ensures a secure grip of
the wheel on di erent road surfaces.
It is simple to use in an easily accessible
location.
Wheel Chock Removal:
Pull the bracket latch in the direction 1.
Remove the wheel chock in direction 2.
Wheel Chock Positioning:
Pull the bracket latch in the direction 1.
Move the wheel chock in the direction 3,
Make sure that the latch is positioned on
the chock.
Tires and Wheels
To Next Page
Loading...
Need help?
General