Safety
2
- 9 -
Park brake is placed on the front console.
Always apply the park brake a er parking
the vehicle. Chock the tires if the vehicle is
parked on a slope.
Park position
Bring the park brake lever to position
1
.
When the park brake is engaged, the
display fl ashes red.
P
Drive position:
Bring the park brake lever to position
2
.
WARNING
Do not apply the park brake while the
brake drums or disks are very hot, wait
for them to cool.
Test Position
A er taking lever to position 1, check
whether the vehicle with semi-trailer
moves by pressing on the lever and pulling
the lever down (position 3). Then, bring
the lever to park position (position 1)
again. Then, get o the vehicle and apply
the trailer park brake.
Park Brake Control