Safety
2
- 8 -
WARNING
Seat belt cannot provide proper
functionality when the belt or lock of
the seat belt is damaged. To prevent
this, check the seat belts for damage or
jamming periodically.
Otherwise, seat belt may be torn in case
of an accident and cause serious or fatal
injuries.
Do not perform any repair or
modifi cation on the seat belts, contact
the authorized service in case of a
damage to the belt. Fasten your seat
belt before starting your vehicle.
Fastening the seat belt
Pull the seat belt continuously from the
reel. Seat belt may be locked when it is
pulled too fast or when the vehicle is on a
slope. In this case, relieve the seat belt and
allow it to retract a little, then try again.
Hear the locking click when you are
inserting the latch of the seat belt to the
buckle. Otherwise, seat belt is not locked.
Adjust the height of the seat belt as per
your your shoulder. (If height adjustment
feature is available)
Press the red button on the buckle to
release the seat belt. Then, release the
belt slowly to allow that it is wound on
the reel fully.
Seat belt shall pass through the middle
of your shoulder. And, the waist part shall
be seated fi rmly on your hips, not on your
stomach.
Seat Belts
To Next Page
Loading...
Need help?
General