4
OPERATION
- 126 -
High speed drive mode
Tractor and Road series vehicles
may some times require to operate
continuously at high speeds.
When high speed and power are required,
you may turn on the power mode of the
transmission, and allow the transmission
to shi quicker at high speeds
To activate the power mode, press the
power rocking switch on the front panel
Press on the switch again when you want
to deactivate it.
PWR fl ashes on the information display
when the power mode is active.
O -road/rocking mode
All automatic transmission vehicles have a
release function to rescue the vehicle
through o -road/rocking when the
traction wheels are stuck on the so
ground. To activate the o -road/rocking
function, the o -road/rocking button
on the front panel must be pressed for 3
seconds. When it is desired to deactivate
it, it is suffi cient to press the button again
for 3 seconds. ROC inscription fl ashes
on the information display while the
o -road/rocking function is activated.
When the o -road/rocking function
is activated, di erential locks are also
activated automatically. A er activating
the o -road/rocking function, to release
the vehicle, the accelerator pedal must
be quickly pressed and released and the
vehicle is ensured to be released back and
forth.
Shi ing
To Next Page
Loading...
