TECHNICAL SPECIFICATIONS
6
- 213 -
USAGE AREA DESCRIPTON CAPACITY SAE NO. FORD SPECIFICATION NO. SPECIFICATION NO.
SPARE WIRE (**) Lithium-based WSD-M1C228-A
AXLE PIN 15 g/pin Lithium-based WSD-M1C228-A
BATTERY TERMINALS 20 g Petroleum jelly ESE N99B144B
BRAKE SHOE SLIDERS (**)
With Copper
Additive
CAB LOCK BUSHING 0.024 g/lock WSD-M1C228-A
DOOR STRUT 75 g/door Polyurea NLGI 2 WSD-M1C238-A
DOOR LOCKS, LATCHES (**) Lithium No. 1 SMIC-1021-A
DECELERATION
ISO 6743-9 L-XBEHB
2
DIN 51502 KP2P-20
-15 °C to -40 °C (***) Lithium-based
WSA-M1C160-D2
SS-M13P12-A
CLUTCH FLUID 0.37 L FMVSS No.116 WSS-M6C65-A2 SUPER DOT4
A/C SYSTEM
REFRIGERANT
790 gr J2776 WSH-M17B19-A
A/C SYSTEM OIL 200 0/+10 cc WSH-M17B19-B
FUEL
280L
TS EN590
410L
450L
510L
600L
UREA
55 L
DIN 70070 WSS-M99C130-A ISO 22241-1
78 L
WASHER TANK 8.5 L
(*) Antifreeze ratio in the coolant shall be at least 30% to protect the engine cooling system against corrosion.
Engine coolant shall include at least 60% antifreeze to prevent freezing down to -52 °C.
(**) This is used as required in maintenances.
(***) Instead of lithium based chassis greases in operating conditions from-15°C to-40°C
Refer to latest Ford Trucks Periodical Maintenance Sheet or contact a Ford authorized dealership for oil replacement intervals.
Fluid Filling Capacities
To Next Page
Loading...
