Fortinet Technologies Inc. Page 92 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
dns-service {default |
specify}
Enter default to use the system’s DNS settings and
specify to use a specific DNS server.
If you enter specify, configure dns-server1 <ip_addr>
and dns-server2 <ip_addr>.
default
domain <name-str> Enter the domain that the DHCP server assigns to
clients.
interface <name_str>
Enter an interface for the server.
port1
lease-time <int>
Enter the length of time an IP address remains assigned
to a client in seconds. Once the lease expires, the
address is released for allocation to the next client
request for an IP address.
604800
match vci {enable |
disable}
Enable to apply the DHCP configuration to the phones of
a specific vendor identified by the VCI string supplied by
the vendor.
Also configure “vci-string <string>” on page 92.
disable
netmask <ip> Enter the netmask of the addresses that the DHCP server
assigns.
255.255.25
5.0
option1 <option_code>
[<option_hex>]
option2 <option_code>
[<option_hex>]
option3 <option_code>
[<option_hex>]
The first, second, and third custom DHCP options that
can be sent by the DHCP server. option_code is the
DHCP option code in the range 1 to 255. option_hex
is an even number of hexadecimal characters. For
detailed information about DHCP options, see RFC 2132,
DHCP Options and BOOTP Vendor Extensions.
0
tftp-server
<tftp_name/ip>
The default TFTP server (192.168.2.99) is where the
configuration profiles for some vendors’ phone models
are stored. This is also the IP address of the default
gateway that the DHCP server assigns to DHCP clients.
If you have your own TFTP server for such information,
enter its IP address. However, SIP phone auto
provisioning will not work in this case.
For more information, see “system auto-provisioning” on
page 82.
192.168.2.9
9
status {enable | disable}
Enable to activate the DHCP server.
enable
vci-string <string> Enter the VCI name to match before serving a device.
Variable Description Default
To Next Page
Loading...
