72 Chapter 2 Working with DaqLab
4. Functions
Figure 26: Analysis wizard – functions
a. Select a function from the Functions list. DaqLab displays the function’s formula
at the bottom of the dialog.
b. If you use the cursor to select a data set, it will be highlighted in the G1 drop list,
but you have the option of selecting a different data set.
c. If the analysis function involves two data sets, select the second data set from the
G2 drop list.
d. Enter a constant in each of the C1 and C2 boxes (optional).
e. Enter a name in the Name text box (optional – the default name includes both the
function’s formula and the data set name).
f. Enter a unit (optional).
g. Select an Open option.
www.esis.com.au
Ph 02 9481 7420
Fax 02 9481 7267
esis.enq@esis.com.au
To Next Page
Loading...