14
reference). When you find the number of a sound that you wish to play,
release the Sound Selector button and the sound will begin playback.
You can use the volume knob to adjust volume up or down to a desired
level. To begin playback of a different sound, simply scroll through the
list, find the sound, and release the Sound Selector button.
2-2 Fusion Remote Setup
After installing batteries or changing batteries in the Fusion remote, it is
recommended that you make it a routine to take a moment to set up
the date and time settings. This section will explain these setup
configurations.
Setting the Clock:
1. Access the Date/Time(r) menu and select “Time.”
1. Use the scroll buttons to set the current time.
2. Push “Play/Select” to lock it in.
The clock can be displayed in either the standard 12-hour format or 24-
hour format (military time).
Configuring Time Format:
1. Access the Date/Time(r) menu and select “Time Format.”
2. Use the scroll buttons to select either 12- or 24-hour time
format.
3. Push “Play/Select” to lock in the setting.
The bottom status line of the Fusion display can show either the current
time or the stand timer. The stand timer will only be displayed if it is
turned on—otherwise, the clock will show the current time. The Fusion
remote will keep track of the current date to properly render moon
phases. This needs to be set up when you first start using the Fusion
remote. The Fusion remote control features a moon phase indicator. To
To Next Page
Loading...
